Ingalo yerobhothi encinci echaziweyo ngokubanzi BRTIRUS0707A Umfanekiso obonakalayo

Ingalo yerobhothi encinci echazwe ngokubanzi BRTIRUS0707A

I-BRTIRUS0707A Irobhothi ye-axis emithandathu

Ingcaciso emfutshane

I-BRTIRUS0707A uhlobo lwerobhothi luphuhliswa ngu-BORUNTE kwimisebenzi ethile enqabileyo, rhoqo kwaye ephindaphinda ixesha elide okanye imisebenzi kwiindawo ezinobungozi kunye nobunzima.

Inkcazo engundoqo

Ubude bengalo (mm):700

Ukuphinda-phinda (mm):±0.03

Ukwazi ukuLayisha (KG): 7

Umthombo wamandla (KVA): 3

Ubunzima (KG): 55

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intshayelelo yeMveliso

I-BRTIRUS0707A yohlobo lwerobhothi yirobhothi ene-axis emithandathu eyaphuhliswa ngu-BORUNTE yezinye izinto ezihlekisayo, rhoqo kwaye ziphindaphinda imisebenzi yexesha elide okanye imisebenzi kwiindawo ezinobungozi kunye nobunzima.Ubude bobude bengalo yi-700mm.Owona mthwalo uphezulu yi-7KG.Iyabhetyebhetye ngamaqondo amaninzi enkululeko.Ifanelekile ukupolisha, ukudibanisa, ukupeyinta, njl. Umgangatho wokukhusela ufikelela kwi-IP65.Ukuthintela uthuli kunye nokungangeni kwamanzi.Ukuphinda ukuchaneka kokumisa yi-±0.03mm.

Isikhundla Esichanekileyo

Ukukhawuleza

Ubomi Obude Benkonzo

Inqanaba lokusilela okuphantsi

Nciphisa uMsebenzi

Unxibelelwano ngocingo

Iiparamitha ezisisiseko

Into		Uluhlu	Isantya esiphezulu
Ingalo	J1	±174°	220.8°/s
	J2	-125 ° / +85 °	270°/s
	J3	-60 °/+175 °	375°/s
Isandla	J4	±180°	308°/s
	J5	±120°	300°/s
	J6	±360°	342°/s

Ubude bengalo (mm)	Ukwazi ukuLayisha (kg)	Ukuchaneka kokuMisa okuphindiweyo (mm)	Umthombo wamandla (kva)	Ubunzima (kg)
700	7	±0.03	3	55

Itshathi yeTrajectory

FAQ

Imibuzo Ebuzwa Rhoqo (F&Q) malunga nohlobo oluncinci lwengalo yerobhothi ngokubanzi:
I-Q1: Ngaba ingalo yerobhothi ingacwangciswa kwimisebenzi ethile?
A1: Ewe, ingalo yerobhothi icwangciswe kakhulu.Inokwenziwa ngokwezifiso ukwenza uluhlu olubanzi lwemisebenzi esekelwe kwiimfuno ezithile, kubandakanywa ukukhetha kunye nendawo, i-welding, ukuphatha izinto eziphathekayo, kunye nokulungisa umatshini.

I-Q2: Ingaba i-interface yeprogram isebenziseka njani?
A2: Ujongano lwenkqubo lwenzelwe ukuba lube lula kwaye lusebenziseke lula.Ivumela ukucwangciswa okulula kweentshukumo zerobhothi, ulungelelwaniso, kunye nokulandelelana komsebenzi.Izakhono zokucwangcisa ezisisiseko zidla ngokwaneleyo ukuba zisebenze ingalo yerobhothi ngokufanelekileyo.

Iimbonakalo

Iimpawu zohlobo oluncinci lwengalo yerobhothi ngokubanzi:
I-1.Compact Design: Ubungakanani obuncinci bale ngalo yerobhothi yenza ukuba ifaneleke kwizicelo apho indawo iyancipha.Inokungena lula kwiindawo zokusebenza eziqinileyo ngaphandle kokubeka esichengeni ukusebenza kwayo okanye uluhlu lwentshukumo.

I-2.I-Six-Axis Flexibility: Ixhotywe ngee-axes ezintandathu zokuhamba, le ngalo yerobhothi inika ukuguquguquka okukhethekileyo kunye nokuhamba.Inokwenza iintshukumo ezintsonkothileyo kwaye ifikelele kwizikhundla ezahlukeneyo kunye nokuqhelaniswa, ivumela imisebenzi eguquguqukayo.

3. Ukuchaneka nokuchaneka: Ingalo yerobhothi yenzelwe ukuhambisa ukunyakaza okuchanekileyo kunye nokuchanekileyo, ukuqinisekisa iziphumo ezihambelanayo.Ngee-algorithms eziphucukileyo zolawulo kunye ne-sensor, inokwenza imisebenzi ethambileyo ngokuphinda-phinda okukhethekileyo, ukunciphisa iimpazamo kunye nokwandisa ukusebenza kakuhle.