Imanipulator yesine ye-axis servo eqhutywa ngenaliti BRTNN15WSS4P, F Umfanekiso obonakalayo

Imanipulator yesine se-axis servo eqhutywa ngenaliti BRTNN15WSS4P, F

I-axis servo manipulator ezine BRTNN15WSS4PF

Ingcaciso emfutshane

Uluhlu lwe-BRTNN15WSS4P/F lusebenza kuzo zonke iintlobo zoluhlu lomatshini wokutofa othe tyaba we-470T-800T yeemveliso zokukhupha.Ingalo ethe nkqo luhlobo lwetelescopic enengalo yemveliso.

Inkcazo engundoqo

I-IMM ecetyiswayo (itoni):470T-800T

IStrowuku esithe nkqo (mm):1500

I-Traverse Stroke (mm):2200

Ukulayisha okuphezulu (KG): 15

Ubunzima (KG):680

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intshayelelo yeMveliso

Uluhlu lwe-BRTNN15WSS4P/F lusebenza kuzo zonke iintlobo zoluhlu lomatshini wokutofa othe tyaba we-470T-800T yeemveliso zokukhupha.Ingalo ethe nkqo luhlobo lwetelescopic enengalo yemveliso.I-Four-axis AC servo drive, ene-C-servo axis esihlahleni, i-angle yokujikeleza ye-C-axis: 90 °.Yonga ixesha kuneemodeli ezifanayo, ukuma okuchanekileyo, kunye nomjikelo omfutshane wokwenza.Emva kokufaka i-manipulator, imveliso iya kwandiswa nge-10-30% kwaye iya kunciphisa izinga eliphosakeleyo leemveliso, ukuqinisekisa ukhuseleko lwabaqhubi, ukunciphisa abasebenzi kunye nokulawula ngokuchanekileyo imveliso yokunciphisa inkunkuma.Umqhubi we-axis ezine kunye nenkqubo edibeneyo yomlawuli: imigca yemiqondiso embalwa, unxibelelwano olude, ukusebenza kakuhle kokwandisa, ukukwazi ukuchasana nokuphazamiseka okunamandla, ukuchaneka okuphezulu kokumisa ngokuphindaphindiweyo, kunokulawula ngaxeshanye ii-axes ezininzi, ukugcinwa kwezixhobo ezilula, kunye nezinga eliphantsi lokungaphumeleli.

Isikhundla Esichanekileyo

Ukukhawuleza

Ubomi Obude Benkonzo

Inqanaba lokusilela okuphantsi

Nciphisa uMsebenzi

Unxibelelwano ngocingo

Iiparamitha ezisisiseko

Umthombo wamandla (KVA)	I-IMM ecetyiswayo (itoni)	Ukunqumla kuqhutywa	Umzekelo we-EOAT
3.4	470T-800T	Injini ye-AC Servo	izihlunu ezibini zezixhobo ezimbini
I-Traverse Stroke (mm)	I-Crosswise Stroke (mm)	IStrowuku esithe nkqo (mm)	Ubukhulu.ukulayisha (kg)
2200	900	1500	15
Ixesha Lokukhupha Likhuphe (umzuzwana)	Ixesha loMjikelo owomileyo (umzuzwana)	Ukusetyenziswa koMoya (NI/umjikelo)	Ubunzima (kg)
2.74	9.03	3.2	680

Ukumelwa komzekelo: W: Uhlobo lweTelescopic.S: Ingalo yemveliso.I-S4: I-axis emine eqhutywa yi-AC Servo Motor (i-Traverse-axis, i-C-axis, i-axis ethe nkqo+i-Crosswise-axis)

Ixesha lomjikelo elikhankanywe ngasentla ziziphumo zomgangatho wovavanyo lwangaphakathi lwenkampani yethu.Kwinkqubo yesicelo sangempela somatshini, ziya kuhluka ngokuhambelana nokusebenza kwangempela.

Itshathi yeTrajectory

A	B	C	D	E	F	G
1742	3284	1500	562	2200	/	256
H	I	J	K	L	M	N
/	/	1398.5	/	341	390	900

Akukho saziso esongezelelweyo ukuba iinkcukacha kunye nenkangeleko zitshintshiwe ngenxa yokuphucula kunye nezinye izizathu.Enkosi ngokuqonda kwakho.

IiManipulators zokuKhetha izaziso

1. Khangela ukuba ubude be-servo manipulator bunokufikelela kumbindi we-mold ukufumana imveliso.

2. Qinisekisa ukuba ifom yemveliso kunye nesakhiwo sivumela i-servo manipulator ukuba iyisuse kakuhle.

3. Khangela ukuba i-servo manipulator efakwe ngokuchanekileyo inokuphakamisa imveliso phezu komnyango wokhuseleko kwaye uyibeke kwindawo efanelekileyo.

4. Qinisekisa ukuba umthamo womthwalo we-servo manipulator unokuzalisekisa imveliso kunye neemfuneko zokuphakanyiswa kunye nokubekwa.

5. Qinisekisa ukuba isantya sokusebenza se-servo manipulator sihambelana nomjikelo wokwenziwa komatshini wokubumba inaliti.

6. Ngokuxhomekeke kuhlobo lokubumba, khetha ingalo enye okanye i-servo manipulator yengalo ezimbini.

7. I-4-axis servo manipulators ikhethwa ngokusekelwe kwisantya sokuvelisa, ukuchaneka kwendawo, kunye nokuqina.

8. Iimfuno zenkqubo ezifana nokupholisa, imilomo yokusika, kunye nokufakwa kwesinyithi kunokulungiswa ngokusebenzisana nezixhobo ezahlukeneyo zangaphandle.

Umxholo woMsebenzi woLondolozo

I-1.Ukucoca, ukuhlolwa, ukukhawuleza, ukuthambisa, ukulungiswa, ukuhlolwa, kunye nemisebenzi yokuzaliswa kwakhona ingahlelwa njengemisebenzi yokugcinwa ngokusekelwe kwindalo yabo.

2.Inkqubo yokuhlola kufuneka iqhutywe ngabasebenzi besondlo somthengi okanye ngoncedo lwabasebenzi bezobugcisa benkampani.

3.Ukucoca, ukuhlola, kunye nemisebenzi yokubuyisela idla ngokuqhutyelwa ngabaqhubi bomatshini.

I-4.Mechanics kufuneka yenze ukukhawuleza, ukulungiswa, kunye nokuthambisa rhoqo.

5.Umsebenzi wombane kufuneka wenziwe ngabasebenzi abaqeqeshiweyo.