Letsoho le lelelele la tjheseletsa letsoho la robotiki BRTIRWD2206A

BRTIRUS2206A Roboto ea axis e tšeletseng

Tlhaloso e Khutšoane

Roboto ena e na le sebōpeho se kopaneng, e nyenyane ka boholo le boima bo bobebe. Boima ba eona bo boholo ke 6kg mme bolelele ba letsoho la eona ke 2200mm.

Tlhaloso e ka Sehloohong

Bolelele ba Letsoho (mm):2200

Pheta-pheta (mm):±0.08

Bokhoni ba ho Laola (kg): 6

Mohloli oa Matla (kVA):5.38

Boima ba 'mele (kg):237

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

45000

Kenyelletso ea Sehlahisoa

Roboto ea mofuta oa BRTIRWD2206A ke roboto ea li-axis tse tšeletseng e ntlafalitsoeng ke BORUNTE bakeng sa indasteri ea li-welding. Roboto ena e na le sebōpeho se kopaneng, e nyenyane ka boholo le boima bo bobebe. Boima ba eona bo boholo ke 6kg mme bolelele ba letsoho la eona ke 2200mm. Sebopeho se sekoti sa letsoho, mohala o bonolo haholoanyane, ketso e tenyetsehang haholoanyane. Boemo ba tšireletso bo fihla IP54 letsohong le IP40 'meleng. Ho pheta-pheta boemo bo nepahetseng ke ± 0.08mm.

Boemo bo Nepahetseng

Ka potlako

Bophelo bo Bolelele ba Tšebeletso

Sekhahla sa ho hloleha ho tlase

Fokotsa Mosebetsi

Mohala oa puisano

Litekanyetso tsa motheo

Ntho		Range	Lebelo le phahameng
Letsoho	J1	±155°	106°/s
	J2	-130°/+68°	135°/s
	J3	-75°/+110°	128°/s
Letsoho	J4	±153°	168°/s
	J5	-130°/+120°	324°/s
	J6	± 360°	504°/s

Bolelele ba Letsoho (mm)	Loading Ability (kg)	Ho nepahala ha Maemo a Phethahetseng (mm)	Mohloli oa Matla (kVA)	Boima (kg)
2200	6	±0.08	5.38	237

Chate ea Trajectory

Kopo

Bolelele ba letsoho bo ama ts'ebeliso ea welding joang?
1.Reach le Sebaka sa Mosebetsi: Letsoho le lelelele le lumella roboto hore e fihle sebakeng se seholo sa mosebetsi, e leng se nolofalletsang ho fihla libakeng tse hole kapa tse rarahaneng tsa welding ntle le ho hloka ho beoa khafetsa. Sena se eketsa katleho mme se fokotsa tlhoko ea ho kenella ha batho.

2.Flexibility: Bolelele ba letsoho le lelelele bo fana ka phetoho e kholoanyane, ho lumella roboto hore e tsamaise le ho chesehela ho pota-potile litšitiso kapa libakeng tse thata, ho etsa hore e tšoanelehe bakeng sa likotoana tsa mosebetsi tse rarahaneng le tse sa tloaelehang.

3.Likarolo tse kholo tsa Mosebetsi: Matsoho a malelele a loketse hantle bakeng sa ho tjheseletsa likotoana tse kholo tsa mosebetsi kaha li ka koahela sebaka se sengata ntle le ho beoa bocha. Sena se molemo liindastering moo likarolo tse kholo tsa sebopeho li hlokang ho chesetsoa.

4.Joint Accessibility: Lits'ebetsong tse ling tsa welding, ho na le li-angles tse itseng kapa manonyeletso a ka bang phephetso ho fihlella ka roboto e khutšoanyane ea letsoho. Letsoho le lelelele le ka fihla le ho chesella manonyeletso ana ao ho leng thata ho fihla ho ona habonolo.

5.Botsitso: Matsoho a malelele ka linako tse ling a ka ba le tšekamelo ea ho thothomela le ho kheloha, haholo-holo ha a sebetsana le meputso e boima kapa ho etsa welding ka lebelo le phahameng. Ho netefatsa ho tiea le ho nepahala ho lekaneng hoa bohlokoa ho boloka boleng ba welding.

6.Welding Speed: Bakeng sa mekhoa e itseng ea ho tjheseletsa, roboto e telele ea letsoho e ka 'na ea e-ba le lebelo le phahameng la mela ka lebaka la sebaka sa eona se seholo sa ho sebetsa, e ka' nang ea eketsa tlhahiso ka ho fokotsa linako tsa potoloho ea welding.

Molao-motheo oa ho Sebetsa

Molao-motheo oa ts'ebetso ea liroboto tsa welding:
Liroboto tsa welding li tataisoa ke basebelisi mme li sebetsa mohato ka mohato ho latela mesebetsi ea 'nete. Nakong ea ts'ebetso ea tataiso, roboto e hopola ka bo eona boemo, boemo, maemo a sisinyehileng, litekanyetso tsa welding, joalo-joalo tsa ketso e 'ngoe le e' ngoe e rutoang, 'me e iketsetsa lenaneo le tsoelang pele ho etsa mesebetsi eohle. Ka mor'a ho qeta thuto, feela u fe roboto taelo ea ho qala, 'me roboto e tla latela ka nepo ketso ea ho ruta, mohato ka mohato, ho phethela mesebetsi eohle, thuto ea sebele le ho ikatisa.