BRTN17WSS5PC,FC Setšoantšo se Featured sa li-axis tse hlano tse telele tse otlolohileng.

Letsoho la manipulator la li-axis tse hlano tse telele tse otlolohileng BRTN17WSS5PC,FC

Mofani oa li-axis tse hlano tsa servo BRTN17WSS5PC,FC

Tlhaloso e Khutšoane

Boemo bo nepahetseng, lebelo le holimo, bophelo bo bolelele, le sekhahla se tlase sa ho hloleha.Ka mor'a ho kenya manipulator e ka eketsa bokhoni ba tlhahiso (10-30%) 'me e tla fokotsa sekhahla sa lihlahisoa, ho netefatsa polokeho ea basebetsi, le ho fokotsa basebetsi.

Tlhaloso e ka Sehloohong

IMM (ton) e khothalelitsoeng:600T-1300T

Stroke e Otlolohileng (mm):1700

Traverse Stroke (mm):2500

Ka holimo (KG): 20

Boima ba 'mele (KG):790

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Kenyelletso ea Sehlahisoa

Letoto la BRTN17WSS5PC/FC le sebetsa mefuteng e fapaneng ea mochini oa ho bopa ente ea polasetiki ea 600T-1300T, drive ea servo ea li-axis tse hlano, e nang le AC servo axis letsohong.Sekhahla sa ho potoloha sa A-axis: 360 °, le angle ea ho potoloha ea C-axis: 180 °, e ka fumanang le ho lokisa angle ea fixture ka bolokolohi.Ka bobeli li na le bophelo bo bolelele, ho nepahala ho phahameng, sekhahla se tlase sa ho hloleha, le tlhokomelo e bonolo.E sebelisoa haholo bakeng sa ente e potlakileng kapa e rarahaneng ea ente ea angle, haholo-holo e loketseng lihlahisoa tsa sebopeho se selelele joalo ka lihlahisoa tsa likoloi, mechini ea ho hlatsoa le lisebelisoa tsa ntlo.Sistimi e kopaneng ea mokhanni oa li-axis tse hlano le molaoli: mela e fokolang ea matšoao, puisano ea nako e telele, ts'ebetso e ntle ea ho atolosa, bokhoni bo matla ba ho thibela ho kena-kenana, ho nepahala ho phahameng ha maemo a pheta-pheta, a ka laola ka nako e le 'ngoe lilepe tse ngata, tlhokomelo ea lisebelisoa tse bonolo, le tekanyo e tlaase ea ho hlōleha.

Boemo bo Nepahetseng

Ka potlako

Bophelo bo Bolelele ba Tšebeletso

Sekhahla sa ho hloleha ho tlase

Fokotsa Mosebetsi

Mohala oa puisano

Litekanyetso tsa motheo

Mohloli oa Matla (KVA)	IMM e khothalelitsoeng (ton)	Tsamaea e Tsamaea	Mohlala oa EOAT
4.2	600T-1300T	Enjene ea AC Servo	tse 'nè tse suction tse peli
Traverse Stroke (mm)	Crosswise Stroke (mm)	Mothapo o Otlolohileng (mm)	Max.loading (kg)
2500	1420	1700	20
Dry Take Out Time (metsotsoana)	Nako ea Dry Cycle (metsotsoana)	Tšebeliso ea Moea (NI/cycle)	Boima (kg)
5.21	15.54	15	790

Kemelo ea mohlala: W: Mofuta oa telescopic.S: Letsoho la sehlahisoa.S5: Li-axis tse hlano tse tsamaisoang ke AC Servo Motor (Traverse-axis, Vertical-axis+Crosswise-axis).
Nako ea potoloho e boletsoeng ka holimo ke liphetho tsa litekanyetso tsa tlhahlobo ea kahare ea k'hamphani ea rona.Ts'ebetsong ea 'nete ea kopo ea mochini, li tla fapana ho latela ts'ebetso ea' nete.

Chate ea Trajectory

A	B	C	D	E	F	G
2067	3552	1700	541	2500	/	173
H	I	J	K	L	M	N
/	/	1835	/	395	435	1420
O
1597

Ha ho tsebiso e 'ngoe haeba litlhaloso le ponahalo li fetotsoe ka lebaka la ntlafatso le mabaka a mang.Kea leboha ka kutloisiso ea hau.

Lenane la Kopo ea Sehlahisoa

Sesebelisoa se setle haholo bakeng sa ho hula sehlahisoa se phethiloeng le nozzle ho tloha mochining oa ente o otlolohileng oa 600T ho isa ho 1300T.E loketse ho tlosa lintho tse etsang ente ea boholo bo mahareng tse kang li-coil winding tubes, likhetla tse kopaneng tsa potoloho, likhetla tsa capacitor, likhetla tsa li-transformer, lisebelisoa tsa TV joalo ka li-tuner, li-switches le likhetla tsa nako, le likarolo tse ling tse bonolo tsa rabara.

Mokhoa oa ho sebetsa oa Manipulator

Manipulator e na le mekhoa e meraro ea ts'ebetso: Manual, Stop, le Auto.Ho fetolela sesebelisoa sa boemo ka ho le letšehali ho kena ka mokhoa oa Manual, ho lumella opareitara hore a sebelise manipulator ka letsoho;ho fetolela sesebelisoa sa boemo bohareng ho kena Stop mode, ho emisa lits'ebetso tsohle ntle le ho qala bocha le ho seta paramente;le ho fetolela switch ea boemo ka ho le letona ebe o tobetsa konopo ea "Start" hang ha o kenya Auto mode.

Kamehla Hlahloba

Kamehla hlahloba ho tiea ha linate le liboutu:
E 'ngoe ea lisosa tse ka sehloohong tsa ho hloleha ha manipulator ke ho phomola ha linate le liboutu ka lebaka la nako e telele ea ts'ebetso e matla.
1. Tighten the limit switching mounting nuts karolong e ka holimo, karolo ea ho taka, le matsoho a ka pele le a mahlakoreng.
2. Hlahloba ho tiea ha theminale ea sebaka sa relay ka lebokoseng la theminale pakeng tsa karolo ea 'mele e tsamaeang le lebokose la taolo.
3. Ho sireletsa mochine o mong le o mong oa mariki.
4. Hore na ho na le liboutu tse hlephileng tse ka bakang tšenyo ea lisebelisoa tse ling.