AC servo molding manipulator BRTNN11WSS3P,F Setšoantšo se Featured

Mofani oa ente ea servo ea AC BRTNN11WSS3P,F

Lisebelisoa tse tharo tsa axis servo manipulator BRTNN11WSS3P/F

Tlhaloso e Khutšoane

Three-axis AC servo drive e boloka nako ho feta mefuta e ts'oanang, boemo bo nepahetseng, le potoloho e khuts'oane ea ho etsa. Ka mor'a ho kenya roboto ena, tlhahiso e tla eketseha ka 10-30% e tla fokotsa sekhahla sa lihlahisoa, ho netefatsa polokeho ea basebetsi, ho fokotsa basebetsi le ho laola ka nepo tlhahiso ea ho fokotsa litšila.

Tlhaloso e ka Sehloohong

IMM (ton) e khothalelitsoeng:250T-480T

Stroke e Otlolohileng (mm):1100

Traverse Stroke (mm):1700

Ka holimo (kg): 10

Boima ba 'mele (kg):305

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

28500

Kenyelletso ea Sehlahisoa

Letoto la BRTNN11WSS3P/F le sebetsa ho mefuta eohle ea mochini oa ente e otlolohileng oa 250T-480T bakeng sa lihlahisoa tse nkiloeng. Letsoho le otlolohileng ke mofuta oa telescopic o nang le letsoho la sehlahisoa. Three-axis AC servo drive e boloka nako ho feta mefuta e ts'oanang, boemo bo nepahetseng, le potoloho e khuts'oane ea ho etsa. Ka mor'a ho kenya roboto ena, tlhahiso e tla eketseha ka 10-30% e tla fokotsa sekhahla sa lihlahisoa, ho netefatsa polokeho ea basebetsi, ho fokotsa basebetsi le ho laola ka nepo tlhahiso ea ho fokotsa litšila. Sistimi e kopantsoeng ea mokhanni oa li-axis tse tharo le molaoli: mela e fokolang ea matšoao, puisano ea nako e telele, ts'ebetso e ntle ea ho atolosa, bokhoni bo matla ba ho thibela ho kena-kenana, ho nepahala ho phahameng ha maemo a pheta-pheta, a ka laola ka nako e le 'ngoe lilepe tse ngata, tlhokomelo ea lisebelisoa tse bonolo, le tekanyo e tlaase ea ho hlōleha.

Boemo bo Nepahetseng

Ka potlako

Bophelo bo Bolelele ba Tšebeletso

Sekhahla sa ho hloleha ho tlase

Fokotsa Mosebetsi

Mohala oa puisano

Litekanyetso tsa motheo

Mohloli oa Matla (kVA)	IMM e khothalelitsoeng (ton)	Tsamaea e Tsamaea	Mohlala oa EOAT
2.84	250T-480T	Enjene ea AC Servo	likarolo tse peli tsa likarolo tse peli
Traverse Stroke (mm)	Crosswise Stroke (mm)	Mothapo o Otlolohileng (mm)	Ka holimo (kg)
1700	3.2	1100	10
Dry Take Out Time (metsotsoana)	Nako ea Dry Cycle (metsotsoana)	Tšebeliso ea Moea (NI/cycle)	Boima (kg)
1.63	6.15	3.2	305

Kemelo ea mohlala: W: Mofuta oa telescopic. S: Letsoho la sehlahisoa. S3: Li-axis tse tharo tse khannoang ke AC Servo Motor(Traverse-axis, Vertical-axis+Crosswise-axis)

Nako ea potoloho e boletsoeng ka holimo ke liphetho tsa litekanyetso tsa tlhahlobo ea kahare ea k'hamphani ea rona. Ts'ebetsong ea 'nete ea kopo ea mochini, li tla fapana ho latela ts'ebetso ea' nete.

Chate ea Trajectory

A	B	C	D	E	F	G
1495	2727	1100	513	1700	/	182.5
H	I	J	K	L	M	N
/	/	1001	/	209	222	700

Ha ho tsebiso e 'ngoe haeba litlhaloso le ponahalo li fetotsoe ka lebaka la ntlafatso le mabaka a mang. Kea leboha ka kutloisiso ea hau.

Melemo ea Pele

Melemo ea mantlha ea ho sebelisa li-axis manipulator tse tharo:

1. Baballa basebetsi, nako le chelete
2. Tsamaiso e bonolo ho khothaletsa tlhahiso
3. Eketsa chelete e kenang haholo
4. Ntlafatsa tšireletso ea mesebetsi
5. Ntlafatsa katleho ea mosebetsi le boleng ba sehlahisoa
6. Ho bonolo ho etsa lenaneo le tlhahiso ea boleng bo phahameng

Sehlahisoa Lintho Tse Bohlokoa

1.Nakong ea ts'ebetso ea ts'ebetso, mochini o etsang ente ea li-axis tse tharo o ka etsa mesebetsi e ikemetseng. E ka fokotsa mokhathala oa matsoho le ho ntlafatsa ho nepahala ha ho bapisoa le mekhoa ea matsoho.

2.Tlhahiso ea nako e le 'ngoe e ka fokotsa litšenyehelo. Ka nako e ts'oanang, e ka ntlafatsa tlhahiso ho latela liphetoho tsa 'maraka, ea ikamahanya le 'maraka ka potlako,' me ea thusa lifeme ho ikamahanya le 'maraka ka potlako.

3.Ho kenya letsoho la robotiki ea li-axis tse tharo ho ka matlafatsa bokhoni ba tlhahiso (20% -30%), litekanyetso tse fokolang tsa ho hlōleha ha lihlahisoa, ho boloka ts'ireletso ea basebetsi, ho fokotsa basebetsi, ho laola ka mokhoa o nepahetseng bophahamo ba tlhahiso, le ho felisa litšila.

Likopo tse Tloaelehileng

1.E ka sebelisoa hammoho le mechini ea ho itšeha ka metsi le ka mochini o kenyang hlobo bakeng sa ho kenya li-mold.

2.E ka boela ea sebelisoa hammoho le thepa ea ho jarolla le ho laolla ka mokhoa o itekanetseng lefapheng la punch ea hardware bakeng sa ho kenya le ho laolla ka mokhoa o itekanetseng.

3. Ka kakaretso, li-axis manipulator tse tharo li sebelisetsoa ho ntša lihlahisoa tsa ente ea hlobo, joalo ka lisebelisoa tsa ntlo, lisebelisoa tsa koloi, lisebelisoa tsa lithuthuthu, lisebelisoa tsa LED (libonela), lisebelisoa tsa k'homphieutha, puisano (liselefounu, matlapa) le lisebelisoa tse fapaneng. lisebelisoa le limithara, lisebelisoa tsa elektronike (e-cigarettes), tlhahiso ea lisebelisoa (li-gear), indasteri ea ho shebella (li-watch casings), joalo-joalo.