High speed swing arm servo manipulator BRTP06ISS0PC

One axis servo manipulator BRTP06ISS0PC

Short Description

BRTP06ISS0PC is telescopic type, with a product arm and runner’s arm, for two plate or three plate mold products take out. The traverse axis is driven by an AC servo motor.

Main Specification

Recommended I.M.M (ton): 30T-150T

Vertical Stroke (mm): 650

Traverse Stroke (mm): /

Max loading (kg): 3

Weight (kg): 221

Send email to us

Product Detail

Product Tags

10000

Product Introduction

BRTP06ISS0PC series applies to all types of horizontal injection machines of 30T-150T for take-out products. The up and down arm is a single/double sectional type. The up and down action, drawing part, screwing out, and screwing in of them is driven by air pressure, with high speed and high efficiency. After installing this robot, productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste.

Accurate Positioning

Fast

Long Service Life

Low Failure Rate

Reduce Labor

Telecommunication

Basic Parameters

Power Source (KVA)	Recommended I.M.M (ton)	Traverse Driven	Model of EOAT
0.05	30T-150T	Cylinder drive	zero suction zero fixture
Traverse Stroke (mm)	Crosswise Stroke (mm)	Vertical Stroke (mm)	Max.loading (kg)
/	120	650	2
Dry Take Out Time (sec)	Dry Cycle Time (sec)	Swing Angle (degree)	Air Consumption (NI/cycle)
1.6	5.5	30-90	3
Weight(kg)
36

Model representation: W: Telescopic type. D: Product arm +runner arm. S5: Five-axis driven by AC Servo Motor( Traverse-axis、Vertical-axis + Crosswise-axis).
The above-mentioned cycle time are the results of our company’s internal test standard. In the actual application process of the machine, they will vary according to the actual operation.

Trajectory Chart

A	B	C	D	E	F	G	H
1357	1225	523	319	881	619	47	120
I	J	K
255	45°	90°

No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

Recommended Industries

F&Q

What are the characteristics of a swing arm manipulator arm BRTP06ISS0PC ?

1.The entire mechanical robot body is made of aluminum alloy precision casting; Complete modular assembly, convenient and fast maintenance.

2. Arm coordination with high rigidity precision linear slide, low frequency, stability, and wear resistance.

3. The rotation direction and angle adjustment of the robotic arm, as well as the adjustment of the up and down strokes, are convenient, flexible, and easy to operate.

4. With the setting of safe operation mode, it completely eliminates safety issues caused by workers' operational errors.

5. Special circuit design can ensure the safety of the injection molding machine manipulator and production molds in the event of sudden system failures and gas supply cuts.

6. The robotic arm has an intelligent handheld control system with stable performance, friendly human-machine interface, and easy operation.

7.The robotic arm has an external output point and can control auxiliary equipment such as conveyor belts and finished product receiving platforms.

Specific inspection operation of each part of manipulator BRTP06ISS0PC：

1) Double point combination maintenance

A. Check whether there is water or oil in the water cup and discharge it in time.

B. Check whether the double electric combination pressure indicator is normal

C. Timing drainage of air compressor