Five axis large injectionmolding manipulator BRTN24WSS5PC，FC

Five axis servo manipulator BRTN24WSS5PC/FC

Short Description

BRTN24WSS5PC/FC is suitable for all types of 1300T-2100T plastic injection molding machines, five-axis AC servo drive, with AC servo axis on the wrist, the rotation angle of the A-axis:360°, and the rotation angle of the C-axis:180°.

Main Specification

Recommended I.M.M (ton): 1300T-2100T

Vertical Stroke (mm): 2400

Traverse Stroke (mm): 3200

Max loading (kg): 40

Weight (kg): 1550

Send email to us

Product Detail

Product Tags

90000

Product Introduction

All types of 1300T to 2100T plastic injection molding machines may use the BRTN24WSS5PC/FC, which has a five-axis AC servo drive, an AC servo axis on the wrist, an A-axis with a 360° rotation angle, and a C-axis with a 180° rotation angle. It has a long lifespan, great precision, a low failure rate, and requires little upkeep. It can also flexibly alter fixtures. It is mostly utilized for fast injection or injection at complicated angles. Particularly appropriate for long-shaped items like automobiles, washing machines, and home appliances. Fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high repeatability of positioning, capacity to concurrently control multiple axes, ease of equipment maintenance, and low failure rate are all advantages of a five-axis driver and controller integrated system.

Accurate Positioning

Fast

Long Service Life

Low Failure Rate

Reduce Labor

Telecommunication

Basic Parameters

Power Source (kVA)	Recommended I.M.M (ton)	Traverse Driven	Model of EOAT
5.87	1300T-2100T	AC Servo motor	four suctions two fixtures
Traverse Stroke (mm)	Crosswise Stroke (mm)	Vertical Stroke (mm)	Max.loading (kg)
3200	2000	2400	40
Dry Take Out Time (sec)	Dry Cycle Time (sec)	Air Consumption (NI/cycle)	Weight (kg)
6.69	21.4	15	1550

Model representation: W:Telescopic type. S:Product arm. S5:Five-axis driven by AC Servo Motor(Traverse-axis、AC-axis、Vertical-axis+Crosswise-axis).

The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.

Trajectory Chart

A	B	C	D	E	F	G
2644	4380	2400	569	3200	/	313
H	I	J	K	L	M	N
/	/	2624.5	/	598	687.5	2000
O
2314

No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

Why Choose Us

Why choose us? Production quality needs:
1.If the molding machine is automatic demolding, the product may be scratched and stained with oil when dropped, resulting in defective products.

2.If a person takes out a product, there is a possibility of scratching the product with their hands, and there is a possibility of dirtying the product due to unclean hands.

3.By using the conveyor belt with a robotic arm, packaging personnel can wholeheartedly and strictly control the quality, without being distracted by the product or being too close to the injection molding machine or too hot to affect work.

4.If the time for personnel to take out the product is not fixed, it can cause shrinkage and deformation of the product (if the material pipe is too hot, it needs to be re injected, resulting in waste of raw materials and high prices of raw materials). The time for the robotic arm to take out the product is fixed to ensure product quality.

5. Personnel need to close the safety door before taking the product, which can shorten or damage the service life of the molding machine and affect production. The use of a robotic arm can ensure the quality of injection molding and extend the lifespan of the molding machine.

Product Application Industry

This manipulator is suitable for various types of plastic injection molding machines of 1300T-2100T, which can be conveniently and efficiently take up such as Motorcycle driving helmet, toys, instrument panel, wheel cover, bumper and other control decorative surface panels and shells in the injection molding industry.