BORUNTE six axis general robot with pneumatic floating electric spindle

Short Description

BRTIRUS0805A type robot is a six-axis robot developed by BORUNTE. The whole operation system is simple, compact structure, high position accuracy and has good dynamic performance. The load ability is 5kg, especially suitable for injection molding, taking, stamping, handling, loading and unloading, assembly, etc. It is suitable for injection molding machine range from 30T-250T. The protection grade reaches IP54 at the wrist and IP40 at the body. The repeat positioning accuracy is ±0.05mm.

Main Specification

Arm Length(mm): 940

Loading Ability(kg): ±0.05

Loading Ability(kg): 5

Power Source(kVA): 2.8

Weight(kg): 53

Send email to us

Product Detail

Product Tags

Specification

Item		Range	Max.Speed
Arm	J1	±170°	237°/s
	J2	-98°/+80°	267°/s
	J3	-80°/+95°	370°/s
Wrist	J4	±180°	337°/s
	J5	±120°	600°/s
	J6	±360°	588°/s

No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

Product Introduction

BORUNTE pneumatic floating electric spindle is designed to remove irregular contour burrs and nozzles. It uses gas pressure to adjust the lateral swing force of the spindle,so that the radial output force of the spindle can be adjusted through an electrical proportional valve, and the spindle speed can be adjusted by a frequency converter. Generally, it needs to be used in conjunction with electrical proportional valves. It can be used to remove die cast and recast aluminum iron alloy parts, mold joints, nozzles, edge burrs, etc.

Tool detail:

Items	Parameters	Items	Parameters
Power	2.2Kw	Collet nut	ER20-A
Swing scope	±5°	No-load speed	24000RPM
Rated frequency	400Hz	Floating air pressure	0-0.7MPa
Rated current	10A	Maximum floating force	180N(7bar)
Cooling method	Water circulation cooling	Rated voltage	220V
Minimum floating force	40N(1bar)	Weight	≈9KG

Pneumatic floating electric spindle function description:

The BORUNTE pneumatic floating electric spindle is intended to eliminate uneven contour burrs and water nozzles. It adjusts the spindle's lateral swing force using gas pressure, resulting in a radial output force. An electrical proportional valve may be used to alter the radial force, while the frequency converter can change the spindle speed.

Usage: Remove die cast, recast aluminum iron alloy parts, mold joints, water outlets, edge burrs, etc

Problem solving: Robots directly polish products, which are prone to over cutting due to their own precision and rigidity. Using this tool can effectively solve debugging and actual production problem.